Hi; I am having a little issue with my app. Every time I shut it down and re start it in the iPhone, there is a blank black screen that lasts about 2 seconds before the splash screen loads. I changed the begin transition to 0 and it sill doing the same. Fyi I am the config running from the BT server. Where should I look? Thanks Alejandra

In your Xcode project look in the bt_images folder for an image named default.png. If you click on it, it should show a black image. By deleting this image and renaming you splash screen image -> default.png, this should fix the problem.

I have the same issue... and some times when I change and save a html/txt screen it do not change on the device... on the device ask to refresh, I accept, but do not update... it happens when I update 4 pages straight... usually one of those pages do not update on the device!!! Thanks, Fernando

@Dkeller: I tried what you suggested and it seems to work. Thanks :-) I also replaced the [email protected]. Now, I have another questions. Because I had a splash page setup in BT, I was seeing 2 screen overlapping: default.png and splash.jpg. I disabled the splash screen from BT and it seems fine. But now, the transition between the splash page and the screen is not smooth anymore. As far as you know, is there a way to do this from Xcode? Thanks a bunch Alejandra

I'm sure there is, but I'm not sure how to do it. I keep both the default.png and the BT splash screen and it works okay.

Ok, this is what I have done I have switched the splash screen on BT back in and am using the Default.png as the image for it. It seems to work Thanks Alejandra